[ Pobierz całość w formacie PDF ]

ÿþSPECIFIC VEHICLE ALARM FITTING INSTRUCTIONS REV. 00
www.cobra.it
PETROL X
MERCEDES S CLASS* 01 ’! DIESEL
’!
MAKE MOD. YEAR.
* Models with original equipment keyless entry system.
ALARM/SIREN Position the compact alarms and the sirens behind the passenger s lateral light.
POSITION
CENTRAL UNIT POSITION Position the modular systems and the modules under the passenger s side mat.
POWER SUPPLY + 30: connect to the wire coming out of one of the original shunting located in the fuse box.
- 31: connect directly to the car body.
IGNITION WIRE + 15/54: connect to the wire located in the wiring harness coming out of the connector of
the ignition key.
DIRECTION INDICATORS Connect to the BLACK/WHITE and BLACK/GREEN wires located in the wiring harness
inside the plastic channel placed behind the passenger s side sill cover.
ELECTRIC WINDOWS Comfort closing
Negative control signal
Connect to the BLUE/YELLOW wire at the position nr. 3, in the 29 way green connector
coming out of the passenger s side door.
ACTIVAT./DEACTIVATION Connections antitheft/vehicle
CONTROLS 38XX Vehicle Position
GREY/BLACK YELLOW position nr.4
YELLOW/BLACK GREEN position nr.3
VIOLET/WHITE +30 in the fuse box
VIOLET +30 in the fuse box
ORANGE +30 in the fuse box
ORANGE/WHITE +30 in the fuse box
The positions nr.3 and nr.4 are located in the connector of the  IR central unit placed
behind the passenger s side foot support, behind the airbag.
IMMOBILISATION POINT Fuel pump
6-8 cylinders model: cut the RED/BLUE wire located in the wiring harness inside the
passenger s side channel.
12 cylinders model: cut both the RED/BLUE wires (1 pump and 2 pump) located in the
wiring harness inside the passenger s side channel.
Note: the wires must be interrupted with 2 separated relais.
BONNET SWITCH Install an additional switch on the front headlamp support plate, driver s side.
DOORS SWITCH Connect to the BROWN/GREY wire for the front doors and to the BROWN/RED wire for
the rear doors located directly on the coming out of the respective serial switches.
BOOT SWITCH Connect to the BROWN/YELLOW wire at the position nr. 2, in the 10 way connector
located on the passenger s side rear light.
mecls01gbbt.doc
Note: This information is not binding, therefore it must be considered only an example for installation purposes that must be executed
as per the instructions given on the product installation manual. [ Pobierz całość w formacie PDF ]